Checked on the Nov 2026 build

CS2 bhop commands bind, config & script How to bunny hop in CS2

The CS2 bhop command is bind mwheeldown +jump: it puts jump on your scroll wheel, so you catch the landing far more often. On a server you host, sv_autobunnyhopping 1 lets you simply hold jump and sv_enablebunnyhopping 1 lifts the speed cap.

Bhop bind · paste into the console
bind mwheeldown +jump
bind mwheelup +jump
bind space +jump
Roys Movement menu: Enable Bunny Hop and Enable Edge Jump turned on Roys · Movement

Step 1

The CS2 bhop bind: jump on the scroll wheel

Turn on the console under Settings → Game → Enable Developer Console (~), press ~ and paste the three lines below. Space keeps working as your normal jump; scrolling down or up jumps too.

Why the wheel helps: with the 2026 jump code, CS2 only counts a jump as a bhop if you press it within about 8 milliseconds of landing (sv_bhop_time_window 0.0078). One scroll sends several jump presses, so one of them usually falls into that window.

Bind jump to the mouse wheel
bind mwheeldown +jump
bind mwheelup +jump
bind space +jump

Scroll at an even pace instead of spinning the wheel. A press that comes less than 1/64 of a second after the previous one is ignored (sv_jump_spam_penalty_time), so very fast spins add nothing.

To undo it, put the wheel back on weapon switching: bind mwheeldown invnext and bind mwheelup invprev.

Step 2

Bhop commands for your own server

These are server settings. They work in a game you host yourself (type map de_dust2 in the console to start one) or on a community server you run. On official matchmaking servers nobody can change them.

Bhop server config · one line
sv_cheats 1; sv_autobunnyhopping 1; sv_enablebunnyhopping 1; sv_staminamax 0; sv_airaccelerate 100; cl_showpos 1
CommandWhat it doesDefault
sv_autobunnyhopping 1Hold jump and you jump again the moment you land.0
sv_enablebunnyhopping 1Lets your speed go above the normal cap of 1.1× run speed.0
sv_staminamax 0Removes the slowdown that builds up when you jump again and again.80
sv_airaccelerate 100Stronger air strafing; community bhop servers commonly run 100 or more.12
sv_cheats 1Only needed for helpers such as cl_showpos and noclip, not for the bhop settings above.0
cl_showpos 1Shows your position and speed at the top of the screen, handy while you practise.0

Older guides also set sv_staminajumpcost 0 and sv_staminalandcost 0. In the current build both only apply to the old jump code (sv_legacy_jump 1), so you can leave them out.

Step 3

How to bunny hop in CS2

With the bind in place, the movement is the same as in every Source game: you keep your speed by strafing in the air and jumping again the instant you land.

  1. Run forward with W to full speed, then jump.
  2. In the air, let go of W: holding it while airborne kills your strafe.
  3. Strafe: hold A while you turn the mouse left, then D while you turn it right. Smooth turns gain speed, sharp flicks lose it.
  4. Scroll just before you touch the ground, so one jump press falls inside the landing window.
  5. Keep the rhythm: one strafe per jump, left and right in turn.

Good to know

Does bhopping work in CS2 matchmaking?

Yes, with limits. On official servers auto bhop is off and bunny hopping speed is capped at 1.1× your run speed, so you keep momentum rather than build it. Every jump also adds a stamina slowdown, and a hop only counts when you press jump in the short window around landing.

That is why a clean bhop in a real match comes down to timing. A scroll bind helps, but each jump is still a guess at the right millisecond.

CS2 bhop script

Auto bhop in real matches.

The commands above stop at your own server. In matchmaking and Premier, Roys's Bunny Hop takes over the timing: it presses jump at the right moment on every landing, so you only steer.

Bhop FAQ

CS2 bhop, explained.

What is the bhop command in CS2?

The command people use is bind mwheeldown +jump, which puts jump on the scroll wheel. Matchmaking has no bhop switch. On your own server, sv_autobunnyhopping 1 turns on auto bhop.

Can you bhop in CS2?

Yes. Bunny hopping works in CS2, but official servers cap the speed at 1.1× run speed and only count a jump pressed in a short window around landing. On community bhop servers these limits are usually off.

How do I turn on auto bhop in CS2?

Start your own server (map de_dust2 in the console) and enter sv_autobunnyhopping 1. Add sv_enablebunnyhopping 1 to remove the speed cap. Neither works in matchmaking.

Why doesn't scrolling help me bhop?

Scroll at an even pace. CS2 ignores a jump press that comes less than 1/64 of a second after the previous one, so spinning the wheel very fast adds nothing. A steady scroll right before you land works best.

Do bhop commands need sv_cheats?

No. sv_autobunnyhopping, sv_enablebunnyhopping and sv_staminamax are normal server settings. sv_cheats 1 is only needed for helpers such as cl_showpos and noclip.

Is there a bhop script for CS2 matchmaking?

Server commands do not work there, so a bhop script has to time the jump itself. Roys does it with Bunny Hop, together with Edge Jump and Auto Stop, in the same license.

Hop on time, in real matches.

Bunny Hop, Edge Jump and Auto Stop in one Roys license, next to aimbot, ESP and radar.